|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
 |
|
||||
 |
 |
|
||||
 |
 |
 |
 |
 |
|
|
 |
|
|||||
 |
|
|||||
|
||||||
| DR1000 : Hip Detail | |
|||||
 |
|
|||||
 Valley Type The panels are rake cut on site to suit the angle of the valley. The insulation is cut back on the underside on site to provide a drip edge into the gutter, alternatively it may be square cut as shown on this detail provided the complete site cut end is painted. The inner skin of the panel is sealed to the gutter which is supported on the steelwork. The panels are fastened through the gutter into the valley steelwork. 
|
|
© 2006 Ward Insulated Panels |